LMP WKP-1314 Instrukcja Użytkownika Pobierz pdf (Strona 8)

Using the Pairing Button

1) You may use the pairing button after you have changed the batteries (you need to

set up the LMP Keypad like you did for the first time) or when the connection is

constantly lost. Follow steps 1 ~ 8 above.

2) If you have used the LMP Keypad with another Macintosh™ computer, you have to

set up the LMP Keypad again. Follow steps 1 ~ 8 above.

Power Management

To save power, it is highly recommended to power off the LMP Keypad if the

LMP Keypad won’t be used for a longer period.

1) To power off the LMP Keypad, hold the power button of LMP Keypad about 3

seconds until green LED indicator is turned off. You should see the message “lost

connection” on you screen. The LMP Keypad is in power off mode.

2) To power on the LMP Keypad again, hold the power button of the LMP Keypad for 1

second. The LED indicator flashes in yellow. You may see the message “connected” on

your screen. You can use the LMP Keypad now.

The pairing time of LMP Keypad with your Macintosh™ computer normally just

takes a few seconds. However, it may take up to 40 seconds with some

Bluetooth dongles.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Brak uwag

LMP WKP-1314 Instrukcja Użytkownika Strona 8